16 Ft. 120 Lumens/Ft.. 12-volt Accent Output Touch Dimmer Switch Tape Light Kit
Everything needed to install 1 zone and 1 area of 16 ft of 12-Volt 120 Lumens/Ft Single-White LED Tape Lighting with a wired Touch Dimmer Switch in one box. Contains one 16 ft roll of 12-Volt 120 Lumens/Ft Single-White LED Tape Lighting with 3M Ultra Bond double-stick tape for peel-and-stick installation, 24W power supply, two 6-packs of 8 mm-EZ connectors, 25ft of wire, touch dimmer switch, two each male/female barrel-to-wire connectors screwdriver, and adhesive promoter wipe. Cut the tape light to length to achieve beautiful, even lighting in any space. IP65 Waterproof rated tape light. Field cut at 2" cut lines. On/off/dim functionality with included touch dimmer switch. Plug-in power supplies allow for installation without an electrician.
- 18 diodes per foot (300 per roll) create even illumination
- UL Listed or recognized components to keep inspectors satisfied
- 90+ CRI tape light for true rather than faded colors
- Aluminum housings available, ordered separately
- Dimmable with included touch dimmer switch
- IP65 rated protective micro waterproof coating for wet or damp locations
- field cuttable approximately every 2 inches for versatile installation
-
Brand
-
ReferenceL-RTDK-16
-
ADA FriendlyNo
-
BrandTask Lighting
-
Width5/16" (8mm)
-
Beam Angle120°
-
Overall Length16 ft
-
CRI90+
-
Attachment Type3M Ultra Bond Double Sided Adhesive
-
DimmableDimmable with compatible dimmer or dimming system
-
Driver12V Plug-in included
-
Projection1/16"
-
InstallationSurface
-
IP RatingIP65
-
Light OutputMedium
-
Minimum Cut Length2"
-
Operating Temperature-4°F to 140°F (-20°C to 60°C)
-
Watts per Foot1.5
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent